2
Introduction
Vickers offers the most complete line of
hydraulic intravane pumps for industrial
applications. A wide variety of single
and multiple configurations enables you
to select the precise pump or
combination best suited for your
application.
Your choice of pump is backed by more
than 70 years of Vickers engineering
and manufacturing skill.
Performance
These cost–effective pumps provide
volumetric efficiencies of more than 90%
and sound levels as low as 62 dB(A)
with operating pressures to 207 bar
(3000 psi).
General Description
Intravane pumps provide longer life,
increased productivity and application
versatility. Extremely low sound levels
are compatible with the most demanding
industrial applications.
Compact size and ease of service allow
maximum equipment design flexibility.
Pumps are available in single, double
and thru-drive configurations.
Features and Benefits
High operating pressure capabilities in
compact packages provide high power
to weight ratios and lower installed
costs.
Low noise characteristics inherent in
intravane design enhance operator
comfort.
Twelve vane system provides low
amplitude flow pulsations resulting in
low system noise characteristics.
Hydraulic balancing, designed to
prevent internally-induced radial shaft
and bearing loads, provides long life.
Double pumps and thru-drive
arrangements save installation space
and cost by eliminating double shaft
extension electric motors or by
reducing the number of motors and
drive couplings.
Thru-drive models provide valuable
circuit design flexibility, such as having
fixed and variable displacement
models on a single input drive.
Sixteen flow displacements and high
operating pressure capabilities provide
optimum selection and single-source
capability for your complete range of
flow and pressure requirements.
Factory tested cartridge kits provide
new pump performance upon
installation.
The cartridge kit design offers fast and
efficient field serviceability. The
cartridge is independent of the drive
shaft, allowing for easy change of flow
capacity and servicing without
removing the pump from its mounting.
Inlet and outlet ports can be oriented
in four different positions relative to
each other, providing greater
installation flexibility and ease of
machine design.
To Next Page
Loading...
Need help?
General
