23
Port Flange Kits / Mtg for Double Pumps
Port Flange Kits and Mountings for Double Pumps
Inlet Outlet No. 1, Shaft end Outlet No. 2, Rear end
Pump Flange Kits
Mounting Bolt Tap
& Full Thread
Depth Flange Kits
Mounting Bolt Tap
& Full Thread
Depth Flange Kits
Mounting Bolt Tap
& Full Thread
Depth
2520V-**AM- N/A from Vickers M12 x 23,8 (0.94) N/A from Vickers M10 x 20,1 (0.79) N/A from Vickers M10 x 20,1 (0.79)
2520V-**A- FL1-20- .50” - 13UNC-2B x
23,8 (0.94)
FL1-8- .375” - 16UNC-2B x
20,1 (0.79)
FL1-6 .375” - 16UNC-2B x
20,1 (0.79)
2525V-**AM- N/A from Vickers M12 x 23,8 (0.94) N/A from Vickers M10 x 20,1 (0.79) N/A from Vickers M10 x 20,1 (0.79)
2525V-**A- FL1-20- .50” - 13UNC-2B x
23,8 (0.94)
FL1-8- .375” - 16UNC-2B x
20,1 (0.79)
FL1-8- .375” - 16UNC-2B x
20,1 (0.79)
3520V-**AM- N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M10 x 20,1 (0.79)
3520V-**A- FL1-24- .625” - 11UNC-2B x
30,0 (1.18)
FL1-10- .437” - 14UNC-2B x
30,0 (1.18)
FL1-6- .375” - 16UNC-2B x
20,1 (0.79)
3525V-**AM- N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M10 x 20,1 (0.79)
3525V-**A- FL1-24- .625” - 11UNC-2B x
30,0 (1.18)
FL1-10- .437” - 14UNC-2B x
30,0 (1.18)
FL1-8- .375” - 16UNC-2B x
20,1 (0.79)
4520V-**AM- N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M12 x 23,8 (0.94) N/A from Vickers M10 x 20,1 (0.79)
4520V-**A- FL1-28- .625” - 11UNC-2B x
30,0 (1.18)
FL1-12- .50” - 13UNC-2B x
23,8 (0.94)
FL1-6- .375” - 16UNC-2B x
20,1 (0.79)
4525V-**AM- N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M12 x 23,8 (0.94) N/A from Vickers M10 x 20,1 (0.79)
4525V-**A- FL1-28- .625” - 11UNC-2B x
30,0 (1.18)
FL1-12- .50” - 13UNC-2B x
23,8 (0.94)
FL1-8- .375” - 16UNC-2B x
20,1 (0.79)
4535V-**AM- N/A from Vickers M16 x 30,0 (1.18) N/A from Vickers M12 x 23,8 (0.94) N/A from Vickers M10 x 20,1 (0.79)
4535V-**A- FL1-32- .625” - 11UNC-2B x
30,0 (1.18)
FL1-12- .50” - 13UNC-2B x
23,8 (0.94)
FL1-10- .437” - 14UNC-2B x
30,0 (1.18)
To Next Page
Loading...