5
Single Pump Model Code
3 4 5 876 9101 2 11
Model Code
1
2
F3 - Viton Seals
Omit if not required
Series Designation
20V - 7 to 45 cm
3
/r (0.43 to 2.78 in
3
/r)
25V - 33 to 67 cm
3
/r (2.0 to 4.1 in
3
/r)
35V - 81 to 121 cm
3
/r (4.9 to 7.4 in
3
/r)
45V - 138 to 193 cm
3
/r (8.4 to 11.6 in
3
/r)
Pilot Designation
Omit - Standard pilot
S - SAE per ISO 3019/1 (SAE J744)
(N/A on 20V pump).
M - Metric per ISO 3019/2 100A2HW
codes (N/A on 20V pump).
3
4
5
6
7
8
11
9
10
Mounting
Omit - Flange mounting
F - Foot mounting
Shafts
Outlet Postions
(Viewed from cover end of pump)
A - Opposite inlet port
B - 90 CCW from inlet
C - Inline with inlet
D - 90 CW from inlet
Design
Rotation
(Viewed form shaft end of pump)
L - Left hand for counterclockwise
R - Right hand for clockwise
Special Suffix
167 -2-bolt, 5.00” dia. pilot
(25V only - N/A for VS or VM
models)
Model
Str.
Key
HD Str.
Key
Spline
20V
25V thru 45V
1
1
N/A
86
151
11
Note: For options other than listed in the model code, i.e. shafts, ports, displacements
and mountings, contact your Vickers representative.
Geometric Displacement
Rated capacity (USgpm) at 1200 rpm,
6,9 bar (100 psi)
Frame Code cm
3
/r in
3
/r
Size
(USgpm)
20V 2 7 0.43
5 18 1.10
8 27 1.67
9 30 1.85
11 36 2.22
12 40 2.47
14 45 2.78
25V 10 33 2.01
12 39 2.47
14 45 2.78
17 55 3.39
21 67 4.13
35V 25 81 4.94
30 97 5.91
35 112 6.83
38 121 7.37
45V 42 138 8.41
45 147 8.95
50 162 9.85
60 193 11.75
Port Connections
A - SAE 4-bolt flange
Port Connection Modifier
Omit - Inch thread port connection
(4-bolt flange)
M - Metric port connection
(4-bolt flange - N/A on 20V)
Std. Pilot Shafts
Model
Str.
Key
HD Str.
Key
Metric Str.
Key
Spline
25VS - 45VS
25VM - 45VM
202
N/A
203
N/A
N/A
292N
297
N/A
“S” SAE Pilot & “M” Metric
ISO Pilot Shafts
12
12
To Next Page
Loading...
Need help?
General
