35
Application Data
Moment of Inertia
Model Nm/sec
2
Moment
lbĆinĆsec
2
25V
35V
45V
2520V
2525V
3520V
3525V
4520V
4525V
4535V
0,000757
0,001395
0,003073
0,001309
0,001469
0,001629
0,002042
0,003186
0,003732
0,004554
(.00670)
(.01235)
(.02720)
(.01159)
(.01300)
(.01495)
(.01807)
(.02820)
(.03303)
(.04031)
Vane Pump Approximate Weights
Frame size kg (lbs.)
20V
25V
25V(T)
35V
35V(T)
45V
45V(T)
2520V
2525V
3520V
3525V
4520V
4525V
4535V
12.0 (26)
14.8 (33)
19.4 (43)
22.7 (50)
28.7 (63)
34.0 (75)
38.1 (84)
20.5 (45)
23,1 (51)
34.0 (75)
34.5 (76)
43.0 (95)
46.0 (101)
53.5 (118)
Mounting Options
Mounting attitude of all pumps is
unrestricted except for any limitations in
respect to rear-end pumps to be titled to
**VT pumps. Such limitations will be
found in the technical literature for those
specific pumps.
Ordering Procedure
State full model designation(s) when
ordering pumps. Port flange kits are
available from Vickers and must be
ordered as separate items.
Specify “BP” adapter when coupling
PVE12/19/21 as second pump on
thru–drives.
Existing “B” thru-drives can be
converted to “BP” using the following
kits:
25VT: 941295 Adapter kit
452865 Coupling
35VT/45VT: 941295 Adapter kit only
Note: Adaptor kit and couplings are
included with unit when ordered with
“BP” designation in model code.
Service Information
Refer to specific Vickers part drawing or
overhaul manual (below) for service
information or consult your Vickers
representative.
Service Literature:
20V I–3195–S
25V I–3196–S
35V I–3197–S
45V I–3199–S
2520V I–3200–S
2525V I–3212–S
3520V I–3202–S
3525V I–3203–S
4520V I–3204–S
4525V I–3208–S
4535V I–3209–S
25VT I–3154–S
35VT I–3149–S
45VT I–3151–S
Overhaul Manuals:
25V I–3157–S
25VT I–3157–S
35V I–3157–S
35VT I–3157–S
45V I–3157–S
45VT I–3157–S
2520V I–3155–S
3520V I–3155–S
3525V I–3155–S
4520V I–3155–S
4525V I–3155–S
4535V I–3155–S
To Previous Page
Loading...