EBARA GS - Page 29

- 29 -
Model GSD
STEP.1
Drain all water from Casing(29).
STEP.2
Remove Protectors(15) from Bracket(12).
STEP.3
Refer to “1.Disassembly Model GS(From
STEP.4 to STEP.8 and STEP.14)”
STEP.4
Remove Casing Cover(18) from Bracket(12).
STEP.5
Remove Mechanical Seal(19) from Casing
Cover(18).
STEP.6
Remove Bracket(12) from Motor(1).
STEP.7
Remove Pump Bushing(4) from Motor
Bushing(2).
STEP.8
Remove Set Screw(7) from Nut(6) and Pump
Bushing(4).