20111028#4.2 EBS Ink-Jet Systeme
EN
31
EN
Technical Parameters
Parameter Description
Number of nozzles 16
Nozzle diameter
150µm as standard
optionally: 120µm, 170µm, 200µm.
Print height 27 mm
Height of objects to be labelled
from 70 mm (contact with both rolls),
from 35 mm (contact with the lower roll
to print with for example 7 nozzles only -
see figure
H
).
A guide and rolls can be used optionally
to support rectilinear printing; they are
most useful for line printing, for labelling
pipes, barrels and other cylindrical ob-
jects.
Working position in 3D space any
Number of text lines per run 1
Line printing
Supports printing of up to 10 texts in
successive lines.
Maximum number of characters
per text
1300 (including control characters for
the printer’s built-in fonts).
Number of texts and accompa-
nying print-parameter (stored in
the printer’s memory at the same
time)
from 1 to 10. Texts are loaded to the
printer via a PC.
from 1 to 30 Optionally.
Printing of graphics (logo, spe-
cial graphics characters )
Ability to edit and print text and graphic
symbols with the application of Win-
dows
®
fonts (True Type fonts) as well as
with a bitmap editor, as standard.
Special characters
National (diacritical) characters, graphic
characters for information, warning,
transport and other purposes (a charac-
ter set defined by the manufacturer), etc.
Variable fields (texts whose con-
tents vary dynamically according to
occurrence of a specific event)
Date and time in any format, expiry date,
incremental or decremental counters.
To Next Page
Loading...
