EasyManua.ls Logo

ECGMAC EM-301 - Baseline Drift Correction

ECGMAC EM-301
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
Solutions:
z Move to a comfortable room if the room is uncomfortable
z Let the patient to be relaxed
z Make sure the bed is not too small.
z The patient should keep quiet
z Change the limb electrodes if it is too tight.
z If the EMG interference still exists, please apply EMG filter .The waveform will be
weakened a little and have obvious effect for the weakening of R wave.
7.6 Baseline Drift
Phenomenon: The baseline of the recorded ECG waveforms wandering as shown in the
following ECG waveforms.
Solutions:
z Make sure the electrodes are well connected
z The lead wire and electrodes are well connected
z Check the cleaning of the electrode and patient skin
z Electrode gel is applied on the electrodes and skin
z Keep the patient from motion or hyperventilation
z The old electrodes and new ones are mix use
z If the problem still exists, please apply baseline filter.

Table of Contents

Related product manuals