PAS-225 VP SAFETY
X7732274200 13
© 5/2017 ECHO Inc.
ENGLISH
◆ Check unit for loose/missing nuts, bolts, and screws.
Tighten and/or replace as needed.
◆ Inspect guards and shields for damage and to ensure that
they are securely in place. Replace if damaged or missing.
◆ Check that the attachment is firmly attached and in safe
operating condition.
◆ Check that handle and harness (if included) are adjusted
for safe, comfortable operation. See Assembly Section for
proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
◆ ALWAYS stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop before
removing obstructions, clearing debris, or servicing unit.
◆ DO NOT start or operate unit unless all guards and
protective covers are properly assembled to unit.
◆ NEVER reach into any opening while the engine is running.
Moving parts may not be visible through openings.
Periodically check fuel system (fuel lines, vent, grommet, fuel
tank, and fuel cap) for leaks especially if the unit is dropped. If
damage or leaks are found, do not use unit, otherwise serious
personal injury or property damage may occur. Have unit
repaired by an authorized servicing dealer before using.
To Next Page
Loading...
