OPERATION PAS-225 VP
28 X7732274200
© 5/2017 ECHO Inc.
7. When starting to edge, run the
engine at full throttle, and lower
the blade gently into the
ground, being careful not to hit
the concrete with the blade.
8. Don't force the blade. Move
only as quickly as the blade will
allow.
The complete unit,
specifically the drive shaft
assembly and muffler
exhaust area may become
very hot during use. Avoid
contact during and
immediately after operation, otherwise serious personal injury
may result.
Starting Cold Engine
The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep mov-
able parts of the attachment away from objects that could be-
come entangled or thrown, and surfaces that could cause loss
of control.