PAS-225 VP OPERATION
X7732274200 21
© 5/2017 ECHO Inc.
ENGLISH
6. Rotate locater pin (A) ¼ turn
clockwise to engage lower shaft
hole. Insure locater pin is fully
engaged by twisting lower drive
shaft. Locater pin should snap
flush in coupler. Full
engagement will prevent further
shaft rotation.
7. Secure lower shaft assembly to
coupler by tightening clamping
knob (D).
Support Handle Installation
Note: Label shows minimum
spacing for support han-
dle location.
1. If necessary, position support
handle for comfortable
operation and securely tighten
screws.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS po-
sition unit so that exhaust is directed away from your face and
body.
To Next Page
Loading...
Need help?
General
