Echo Power Pruner PPT-300ES

32
December 1st 2010
DECLARATION “CE” OF CONFORMITY
The undersigned manufacturer:
ECHO, INCORPORATED
400 OAKWOOD ROAD
LAKE ZURICH, ILINOIS 60047-1564
U.S.A.
declare under our sole responsibility that the product:
GAS POWERED POLE CUTTER POWER PRUNER
Type : PPT-300ES
Serial Number 37001001 and up
assembled by:
ECHO, INCORPORATED
400 Oakwood Road
Lake Zurich, Illinois 60047-1564
U.S.A.
Following the provisions of the Directives 2006/42/EC and 2004/108/EC including valid amendments and is in
conformity with the following standards:
EN ISO-12100-2, EN ISO 11680-1:2000 EN 50081-1, EN 50082-1, EN 55014 AND
EN 55022.
Notied Body: 0404 The Swedish Machinery Testing Institute, Fyrisborgsgatan 3, SE-754 50 Uppsala, Swe-
den has drawn up an EC-Type Examination Certicate No 0404/10/2283
Comply with the requirements of Directive 97/68/EC, 2002/88/EC Certicate No
e13*97/68SH2G3*2002/88*0378*00
Comply with the requirements of Directive 2000/14/EC
assessment procedure followed ANNEX V
Measured sound power level : 108 dB(A)
Guaranteed sound power level : 111 dB(A)
Technical Documentation kept by:
Company: SMP (The Swedish Machinery Institute)
Address: Box 4053, SE-904 03 Umea, Sweden
The authorized representative in Europe who is
authorized to compile the technical le:
Company: Atlantic Bridge Limited
Address: Atlantic House, PO Box 4800,
Earley, Reading RG5 4GB, United Kingdom
Mr. Philip Wicks
GB
Steve M. Bly