Section 5
Operation
Page 5 - 6 EchoStar DVR-5000
© 2001 EchoStar International Corporation
All rights reserved
1.6.6. TO HIDE A CHANNEL
4. When the keyboard appears:
a. use the arrow keys to navigate;
b. press OK to accept the character;
c. select the button to get lower case
characters and numbers;
d. select the button
e. on the RCU, press the OK key to confirm.
5. Either:
a. Press the WHITE key to end the session, or
b. select the next channel you want to rename.
CAUTION
You can only hide a channel if you have set the parental lock and the PIN-code
correctly. We recommend that you check if the hide option is set correctly.
NOTE
After you have set a hide onto a channel, the installation and the EDIT menu are
automatically locked with an installation lock to prevent unauthorized access.
Now you can only access these functions if you know the correct PIN-code.
1. Make the hide function available for edit:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu
c. Enter the correct PIN-code as requested;
2. Set the Master Hide to Off.
3. On the RCU:
a. press the MENU key;
b. press the EXIT key.
To Next Page
Loading...
