EchoStar DVR-5000 HDD - To Set the Local Date and Time

Operation Section 5
Digital Satellite Receiver Page 5 - 19
© 2001 EchoStar International Corporation
All rights reserved
5
5.5. TO SET THE LOCAL DATE AND TIME
5.6. TO SET THE TV SYSTEM
NOTE
Make sure the local time is set correctly otherwise you can not view and use the
EPG information because the EPG and the related timers need the correct time.
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.