Eclipse avn8826 - Switching to the VTR Setting Screen

117
VTR
Switching to the VTR setting screen
Switch to the VTR setting screen in VTR mode to perform the following operations.
● To adjust sound quality (EQ, POS etc.)
● To switch screen modes (wide mode)
To u ch .
● Touch to return to the VTR operation screen.
●After switching to the VTR operation screen, touch switches will be displayed for
about 6 seconds. Pressing will display them again.
●The VTR operation screen can be displayed by touching the screen, even when
the VTR is playing.
●It is possible that the image may not be displayed correctly depending on the
connected devices.
AUDIO
SET
BACK