37
Basic operation
Disabling the Cross Over (NF) function
Woofer (non-fader output) LPF (Low Pass Filter) can be turned ON/
OFF.
Turn the [SEL] button to select ON or OFF.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in sound
adjustment mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
Cut off frequency is fixed at 80 Hz and slope is fixed at 18 dB/oct.
Adjustments cannot be made.
[SEL] button
[RTN] button
[SOUND] button
CD5425.book 37 ページ ２００４年１２月１１日 土曜日 午後５時９分
To Next Page
Loading...
