63
How to operate the tuner
Entering stations into memory automatically
(The automatic preset mode: ASM)
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
Press the [SEL] button for more than two seconds until a
beep is heard.
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
● Pressing the preset buttons ([1] to [6]) allows you to make one-
touch station selections. The frequency of the selected station
is on the display.
● When a new station is set in memory, the station previously set
in memory will be deleted.
● If there are fewer than six receivable stations, the stations set in
the remaining buttons will be retained.
If the vehicle’s battery is disconnected (for repairs to the vehicle or for
removing the receiver), all stations in memory will be lost. In such a
case, set stations in the memory again.
[SEL] buttonButtons [1] to [6]
[FM AM] button
CD5425.book 63 ページ ２００４年１２月１１日 土曜日 午後５時９分
To Next Page
Loading...
Need help?
General
