85
How to operate the receiver with an optional CD changer connected
Playing the beginning of tracks (SCAN)
Press the [4 SCAN] button.
Pressing the button for less than one second causes the changer to
move up to the next track and play it for 10 seconds, then move up
to the next track and play it for 10 seconds, and so on, on one CD,
until the button is pressed again.
Hold the button until the [ALL SCAN] display appears to play the
first 10 seconds of the first track of every CD loaded.
Repeating the same track (REPEAT)
Press the [5 RPT] button.
Pressing on the button for less than one second causes the
changer to repeat the track currently being played, until the button is
pressed again.
Hold the button until the [ALL RPT] display appears to repeat all
tracks on the CD being played.
● To continue playing a desired track, press the button again to
stop scanning.
● After the entire disc is scanned once, ordinary playback starts
from the point where scanning started.
[4 SCAN] button [5 RPT] button
CD5425.book 85 ページ ２００４年１２月１１日 土曜日 午後５時９分
To Next Page
Loading...
Need help?
General
