EcoFlow 4000 - Transportation

25 |
Transportation
• When moving, storing or operating the generator, do not place it on its side. The engine oil may
leak and damage the engine or your property.
• If the generator is constantly running, allow it to cool before being loaded onto the transport
vehicle. Hot engines and waste systems may cause burns and can cause certain materials to
ignite. To prevent fuel spills during transport, position the generator vertically in the standard
operating position, and turn the engine switch to the “OFF” position.
• During transportation, ensure the generator is not dropped or subjected to impacts.
Two months to one
year
Evacuate the fuel and inject fresh fuel
Drain the fuel from Carburetor Drain Cup 
Drain the fuel from Sediment Bowl 
Over one year
Evacuate the fuel and inject fresh fuel
Drain the fuel from Carburetor Drain Cup 
Drain the fuel from Sediment Bowl 
Drain the original fuel into a suitable storage container after moving it out of storage and
inject fresh fuel before starting it.
 Loosen and remove the oil drain bolt and drain all the fuel out of the carburetor. Drain the fuel into a suitable
container, and screw in and tighten the oil drain bolt.
 After turning off the Engine Switch, remove the Sediment Bowl, empty the gasoline from the bowl, reinstall the
Sediment Bowl and tighten it.