EcoFlow 4000 - Application Range; Special Requirements

19 |
Application Range
• When this generator is supplying power to precision instruments, electronic controllers, personal
computers and microcomputers, please keep the generator a sufcient distance away from any of
the foregoing equipment to avoid electromagnetic interference, and at the same time, to ensure
that the generator will not be interfered with by these electronic devices.
• If this generator is used to supply power to medical devices, it is recommended to consult with the
corresponding equipment manufacturers and technicians rst. This is because some electronic
equipment or general purpose machines in hospitals require a strong current upon startup and
may not be able to use the generator. Please contact the equipment manufacturer for conrmation
even if the respective start parameters of the equipment satisfy the conditions listed in the table
above.
Please make sure that the total load of the generator is within the rated range before using the generator, or
otherwise the generator may be damaged.
Load
Power Factor 1 0.8-0.95 0.4-0.75(Efciency 0.85)
Power Output
≤3200W(Gasoline)
≤2900W(LPG)
≤2560W(Gasoline)
≤2320W(LPG)
≤1280W(Gasoline)
≤1160W(LPG)
Special Requirements
• Local laws or regulations may apply to the intended use of the generator set. For further
information, please consult with qualied electricians, electrical inspectors, or the local authorities
with jurisdiction.
• In some regions, generator sets must be registered with local utility companies.
• Generator sets used on construction sites may be subject to related regulations or standards.