ECOVACS WINBOT - Part Identification and Technical Specifications

ENG - 76
1.2 Part Name
P1
P2
P3
P4
P9
P15
P16
P17
P18
P10
P11
P12
P13
P14
P5
P6
P7
P8
Front Bottom
P1 Bumper
P2 Status Light Indicator
P3 Air Release Trigger
P4 Safety Protection Cord
P5 Remote Control Signal Receiver
P6 Start/Pause Button
P7 Handle
P8 OFF-ON- Chargong Button
P9 Cleaning Pad
P10 Status Light Indicator
P11 Squeegee
P12 Bottom Power Switch
P13 Driving Trerad
P14 Frameless Sensor
P15 Side Roller
P16 Remote Control Signal Receiver
P17 Cupule
P18 Wiping Pad
1.3 Technical Parameters
Working speed (m/s) 0.15
Built-in battery capacity (mAh) 850
W0rkir1gtime(mir1) Unlimited
Working noise (db) 55
Frameless identification NO
Cleanable glass thickness(cm) Unlimited
Back up battery for loss of electric Lithium
About noise:
The data is from Laboratory testing at our Company based on noise test in accordance with
EC 60704-1:1997, EC 60704-2-1:2001 International Srandard. The actual heard noise is different
according to different use environment (room temperature, humidity, atmospheric pressure,
original indoor noise, etc.). Our company reserves the right to make any technology and design
changes to this product due to the needs of continuous improvement ofthe product. The right
onterpretation belongs to ECOVACS Robotics Co., Ltd.