BAT-I2 USER MANUAL
43
Chapter 3
fTXE Information
Scroll to this item and press <Enter> to view the following screen.
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F1:General Help
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Enable/Disable TXE Firmware
TXE Information
Sec RC Version 00.05.00.00
TXE FW Version 01.00.02.1060
TXE Mode [Enabled]
Press <Esc> to return to the Chipset Menu page.
Azalia internal HDMI Codec (Enabled)
This item enables or disables Azalia internal HDMI codec.
Sec RC Version (00.05.00.00)
This item shows the Sec Reference Code Version.
TXE FW Version (01.00.02.1060)
This item shows the TXE Firmware Version.
TXE Mode (Enabled)
This is TXE mode control item, it is used to enable or disable the TXE firmware.
Case Open Warning (Disabled)
This item enables or disables the warning if the case is opened up, and the item
below indicates the current status of the case.
Chassis Opened (No)
This item indicates whether the case has been opened.
Main Advanced Chipset M.I.B III Security Boot Exit
To Next Page
Loading...
Need help?
General
