ECS BAT-I2 - Specifications

Chapter 1
2
BAT-I2 USER MANUAL
SOC
Specifications
• Signal channel DDR3 SO-DIMM memory architecture
• 1 x 204-pin DDR3 SO-DIMM socket supports up to 8 GB
• Supports DDR3 1333 MHz DDR3 SDRAM
Memory
• 1 x mini PCI Express slot
(the mini PCIE (half-card) supports extension cards with PCIE
signal
• Supported by Intel
®
Bay Trail-D J1750/J1800/J1850/J1900/
J2850/J2900 SOC
- 2 x Serial ATA 3Gb/s devices
Expansion
Slots
Storage
• 1 x PS/2 Keyboard & PS/2 Mouse connectors
• 1 x USB 3.0 port (or one 5-pin USB 2.0 header)
• 4 x USB 2.0 ports
• 1 x RJ45 LAN connector
• 1 x D-sub (VGA) port
• 1 x HDMI port
• 1 x Audio port (1 x line-in, 1 x line-out, 1 x Microphone)
Rear Panel I/O
LAN • Realtek 8111G Gigabit LAN (or RTL8106E 10/100 LAN)
• VIA VT1705CF
- 6 Channel High Definition Audio Codec
- Compliant with HD audio specification
Audio
• Onboard Intel
®
Bay Trail-D J1750/J1800/J1850/J1900/J2850/
J2900 SOC
• 1 x 24-pin ATX Power Supply connector (optional)
• 1 x 4-pin 19V power connector (optional)
• 1 x 4-pin CPU_FAN connector
• 1 x 4-pin SYS_FAN connector
• 2 x USB 2.0 header support additional four USB 2.0 ports
• 2 x Serial ATA 3Gb/s connectors
• 1 x BZ
• 1 x Front Panel switch/LED header
• 1 x Front Panel audio header
• 1 x Clear CMOS jumper
• 1 x BKLT_PWR jumper (optional)
• 1 x LVDS select jumper (LCD_PWR) (optional)
• 1 x LVDS connector (optional)
Internal I/O
Connectors &
Headers
Note: Please go to ECS website for the latest CPU support list.
Note: Please go to ECS website for the latest Memory support list.
• 1 x DC_IN port (optional)
• 2 x COM headers
• 1 x LDC header
• 1 x Case open header
• 1 x SATA power connector (optional)
• 1 x LVDS brightness control header (DISP_BRT) (optional)
• 1 x LPT header