BAT-I2 USER MANUAL
11
Chapter 2
2-4-2. Installing Add-on Cards
The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard’s features and capabilities. With these efficient facilities, you can
increase the motherboard’s capabilities by adding hardware that performs tasks
that are not part of the basic system.
Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually
configure the card before installation.
miniPCIE
Slot
The mini PCIE (half-card) supports extension cards with PCIE signal.
To Next Page
Loading...
Need help?
General
