BAT-I2 USER MANUAL
47
Chapter 3
This page enables you to set the keyboard NumLock state.
Boot Menu
Fast Boot (Disabled)
Use this item to enable or disable the fast boot.
Bootup NumLock State (On)
This item enables you to select NumLock state.
Set Boot Priority
This item enables you to set boot priority for all boot devices.
Quiet Boot (Enabled)
Use this item to enable or disable the Quiet boot.
Boot Option #1/ 2/ 3/ 4/ 5/ 6 /7
These items show the boot priorities and can be used to set the boot priorities of
various device categories.
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F1:General Help
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Enables or disables boot with
initialization of a minimal set of
devices required to launch boot
option. Has no effect for BBS boot
options.
Boot Configuration
Fast Boot [Disabled]
Bootup NumLock State [On]
Quiet Boot [Enabled]
Set Boot Priority
Boot Option #1 [Hard Disk]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB/Floppy]
Boot Option #4 [USB CD/DVD]
Boot Option #5 [USB Hard Disk]
Boot Option #6 [USB Flash: UEFI: J...]
Boot Option #7 [Network]
fUEFI USB Flash Drive Priorities
Main Advanced Chipset M.I.B III Security Boot Exit
To Next Page
Need help?
General
