32
Introducing the Motherboard
1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/1st FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
f Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Removable Drives
1st Drive 1st FLOPPY DRIVE
Help Item
Specifies the boot
sequence from the
available devices.
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Removable Drives
Press <Esc> to return to the Advanced setup page.
Press <Esc> to return to the main menu setting page.
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second, and
Third boot devices.
BIOS Protect (Disabled)
This item enables or disables BIOS protect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
