30
Using BIOS
ff
ff
f
CPU Configuration
The item in the menu shows the CPU configuration.
Press <Esc> to return to the Advanced Menu page.
Dual Core Running @ 1623 MHz 1300 mV
This item shows the information of the current CPU Frequency & Voltage.
Max Speed (1600 MHz) Intended Speed (1600 MHz)
This item shows the maximum & intended speed of the CPU.
Min Speed (800 MHz)
This item shows the minimum speed of the CPU.
Microcode Patch Level (5000028)
This item shows the Microcode revision.
L1 Instruction Cache (32 KB/8-way)
This item shows CPU L1 Cache.
L2 Cache (512 KB/16-way)
This item shows CPU L2 Cache.
No L3 Cache Present
This item shows CPU L3 Cache.
AMD C&Q (Enabled)
This item enables or disables the CPU C&Q Function.
SB Clock Spread Spectrum (Enabled)
This item enables or disables the SB Clock Spread Spectrum.
L1 Data Cache (32 KB/2-way)
This item shows CPU L1 Cache.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010, American Megatrends, Inc.
+/- :Change Opt.
Enter : Select
F1:General Help
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enable /Disable the AMD C&Q
Function.
CPU Configuration
Nodeo: AMD E-350 Processor
Dual Core Running @ 1623 MHz 1300 mV
Max Speed: 1600 MHz Intended Speed: 1600 MHz
Min Speed: 800 MHz
Microcode Patch Level: 5000028
---------Cache per Core---------
L1 Instruction Cache: 32 KB/8-way
L1 Data Cache: 32 KB/2-way
L2 Cache: 512 KB/16-way
No L3 Cache Present
AMD C&Q [Enabled]
SB Clock Spread Spectrum [Enabled]
Main Advanced Chipset M.I.B III Boot Security Save & Exit
To Next Page
Loading...
Need help?
General
