ECS HDC-M User Manual

31
Using BIOS
ff
ff
f
SATA Configuration
Use this item to show the mode of Serial ATA configuration options.
SATA Port1~4 (Not Present/INTEL SSDSA2M0 (80.0GB))
This motherboard supports four SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel,
and each channel allows one SATA device to be installed. Use these items to configure
each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
SATA Mode (IDE)
Use this item to select SATA mode.
Serial-ATA Controller (Enabled)
Use this item to enabled or disable the onchip SATA channel.
SATA Configuration
Serial -ATA Controller [Enabled]
SATA Mode [IDE]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 INTEL SSDSA2M0 (80.0GB)
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Enable/Disable SATA Controller
Version 2.10.1208. Copyright (C) 2010, American Megatrends, Inc.
+/- :Change Opt.
Enter : Select
F1:General Help
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Main Advanced Chipset M.I.B III Boot Security Save & Exit

ECS HDC-M Specifications

General

Brand	ECS
Model	HDC-M
Category	Motherboard
Language	English