Preparations Start Recording
Register SD card (recorder)
Insert SD card into the recorder
(or unplug USB cable)
Connect the patient cable,
electrodes and recorder
Load battery
-> Start recording
Input patient ID
Basic Setting >Patient ID
is set to On
Preview ECG waves
Basic Setting >ECG Preview
is set to On
Decide recording plan
Press to confirm data
sampling
: Switch lead/channel
ECG Waves
Lead/Channel
Name
Reset patient ID
Write down starting time in
patient log
· Register E-label of SD card
in Holter software, or
· Manually stick the labeling
on the SD card surface
To Next Page
Loading...