Need help?Do you have a question about the EDAN INSTRUMENTS SE-2003 Series and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | SE-2003 Series |
| Manufacturer | EDAN INSTRUMENTS |
| Channels | 3 |
| ECG Cable | Standard |
| Display | LCD |
| Recorder | Thermal array |
| Paper Speed | 25/50 mm/s |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight (approximate) | Approx. 5 kg |
| Power Supply Voltage | AC 100-240V, 50/60Hz |
Defines the intended use and applications of the Holter System Recorder.
Provides critical warnings and cautions for safe operation, including specific safety warnings, battery care, and general cautions.
Describes the physical layout and components of the Holter System Recorder.
Explains how and where the ECG data is stored within the system using SD cards.
Provides step-by-step instructions for inserting and removing the SD card from the recorder.
Details the procedure for installing and replacing the AAA battery for powering the device.
Highlights the key functionalities and capabilities of the Holter System Recorder.
Lists all necessary items required before starting the Holter recording procedure.
Outlines the steps to prepare the patient for ECG data acquisition, including skin cleaning.
Explains how to properly connect the patient cable to the recorder and electrodes.
Details the process of correctly attaching ECG electrodes to the patient's body, including placement guides.
Provides a general overview of the ECG sampling process and the steps involved.
Details the step-by-step procedure to initiate the ECG recording process.
Describes the active recording phase and the information displayed on the recorder's screen.
Explains the recommended methods for properly terminating an ECG recording session.
Outlines the procedures for transferring collected ECG data to the analysis software.
Covers fundamental configuration options for the Holter system's operation.
Details advanced system configuration parameters for specialized use.
Provides information on warning messages, error prompts, and their meanings for troubleshooting.
Offers general guidelines for keeping the device clean and preventing damage from dust and dirt.
Details the cleaning procedures for the recorder (7.2.1) and patient cable (7.2.2) using approved agents.
Outlines the procedures for disinfecting the recorder (7.3.1) and patient cable (7.3.2) for hygiene.
Covers periodic maintenance checks like visual inspection (7.4.1) and functional tests (7.4.2).
Lists all available accessories for the Holter System Recorder with their part numbers.
Details the terms and conditions of the product warranty and conditions for voiding it.
Provides contact details for customer support, service inquiries, and technical assistance.
Lists the safety standards and compliance requirements the device adheres to.
Details the environmental conditions for transport, storage, and working operation.
Outlines the physical dimensions and weight of the different recorder models.
Provides information on battery types supported and expected battery life.
Lists key performance metrics like channels, recording mode, frequency response, and impedance.
Details the electromagnetic emission characteristics and compliance of the device.
Outlines the device's immunity to electromagnetic disturbances and compliance levels.
To Next Page
