SE-2003&SE-2012 Series Holter System Recorder User Manual
- 19 -
NOTE:
1. If the patient has been registered in the analysis software beforehand, the recorder
enters the recording screen directly.
2. The inner-placed clock in SE-2003/SE-2012 series exactly records starting and
ending time which can be obtained from creating time of event files or data files
afterwards. Some analysis software possibly does not support the function. Manual
recording time depends on the analysis software used.
3. New battery is recommended for each ECG sampling process.
4. The time axis (paper speed) in waveform display mode is around 1.5cm/s or 3cm/s,
which is slightly different from regular ECG with paper speed of 2.5cm/s or 5cm/s.
Actually the main purpose is to visually assess signal quality and basic form, but not
to be basis of quantitative measurement.
4.3 Sampling…
The recorder will erase the existing data first to stabilize the circuit and ECG electrodes.
Current date
Recorded time
Current time
Lead off message
Patient information
Battery capacity
Recording time
Working status
· REC: Recording
· END: Record completes
Event mark
Paced rhythm
4.4 Stop Sampling
Recommended regular ways to terminate recording:
1. Recording will automatically stop if recording has lasted for 1 day (or 2 days, 3 days set
beforehand);
2. Recording will automatically stop if battery is used up;
3. Directly connect with USB cable after removing patient cable;
To Next Page
Loading...