EDAN Acclarix AX8 User Manual

Acclarix AX8/Acclarix AX7 Diagnostic Ultrasound System User Manual Measurements and Reports
- 105 -
No.
Measurement
Group
Measurement
Item
Description
Method
Spline Trace
** The measurement method including 1 Distance, 2 Distances and 3 Distances can be switched by
the Tool Options paddle key.
8.2.3. Obstetrics Measurements
Obstetric measurements are used to calculate the GA (Gestation Age), EDD (Estimated Delivery Date)
and EFW (Estimated Fetus Weight).
The Obstetric package supports measurements and reports on up to four fetuses. If you know the
number of fetuses at the start of the exam then you can enter this in the Patient page (see section 4.4).
When the number of fetuses is known the system adjusts the user interface to optimize for that
number. If no information is entered about the number of fetuses the system will assume there is one.
No.
Measurement
Group
Measurement
Item
Description
Method
Section 1: B-mode Measurements
1.1
Fetal Biometry
BPD
Biparietal Diameter
Distance in
B-mode generic
measurements
HC
Head Circumference
Ellipse in B-mode
generic
measurements
AC
Abdominal Circumference
FL
Femur Length
Distance in
B-mode generic
measurements
HUM
Humerus Length
CER
Cerebellum Diameter
OFD
Occipital Frontal Diameter
NF
Nuchal Fold
TAD
Transverse Abdominal
Diameter
APAD
Anteroposterior Abdominal
Diameter
THD
Thoracic Diameter
APTD
Anteroposterior Trunk
Diameter
TTD
Transverse Trunk Diameter
FTA
Fetal Trunk Area
Ellipse in B-mode
generic
measurements

EDAN Acclarix AX8 Specifications

General

Brand	EDAN
Model	Acclarix AX8
Category	Diagnostic Equipment
Language	English