EDAN iM70 - A.2.6 Data Management

Patient Monitor User Manual Product Specification
- 240 -
Condition
At 25~30
°C, with (a) new fully charged battery/batteries, EDAN module
in use, continuous SpO
2
measurement and NIBP automatic measurement
mode at interval of 15 minutes, ECG/TEMP module connected, recording
at interval of 10 minutes, brightness set to “1”.
Charge Time iM50/iM60
iM70/M50
2500 mAh ≤ 3.5 h, 100% charge
≤ 3.15 h, 90% charge
5000 mAh ≤ 6.5 h, 100% charge
≤ 5.85 h, 90% charge
iM80/M80 One battery (5000 mAh) ≤ 6.5 h, 100% charge
≤ 5.85 h, 90% charge
Two batteries (2*5000 mAh) ≤ 13 h, 100% charge
≤ 11.7 h, 90% charge
Condition
Environment temperature: 25±2
°C.
iM50/M50 is powered off.
Charge/Discharge
Cycle
300 times
A.2.5 Recorder
Record Width 48 mm
Record Paper Width 50 mm
Paper Speed 12.5 mm/s, 25 mm/s, 50 mm/s
Trace 3
Recording types Continual real-time recording, 8-second real-time recording,
20-second real-time recording, trend graph recording, trend table
recording, NIBP review recording, arrhythmia review recording,
alarm review recording, drug calculation titration recording,
Hemodynamic Calculation result recording, Oxygenation Calculation
result recording, Ventilation Calculation result recording, Renal
Function Calculation result recording, 12-lead analysis recording,
C.O. measurement recording, frozen waveform recording, ST view
recording, QT view recording
A.2.6 Data Management
Data Review
Trend Data 3 hours, resolution: 1 s
120 hours, resolution: 1 min