EDAN iM70 - Page 34

Patient Monitor User Manual Basic Operation
- 22 -
iM80/M80
1
Handle: for lifting or moving the monitor, which is convenient, comfortable and
fast.
2 Label
3 VGA output: it enables the VGA video output.
4
USB interfaces: supports USB 2.0 output. It connects approved USB devices, for
example, USB flash disk, barcode scanner, mouse and keyboard.
5
Multifunctional port: Nurse call port/ analog output/ defibrillator synchronization.
Nurse call port: it connects the monitor to the hospital’s nurse call system. Alarms
indications are alerted through the nurse call system if configured to do so.
Analog output: the monitor outputs the waveform through the port.
Defibrillator synchronization: the monitor outputs the defibrillator
synchronization signal through the port.
6
Network interface. It connects the monitor to MFM-CMS, CMS-LITE or gateway
via standard network cable, which enables MFM-CMS or gateway to achieve
bidirectional communication with the monitor.
7 RS232 interface. Connect it to communicate with other devices.
8 Anti-theft lock interface
9
Heat sink: Adopt No-fan design, which is dust-free, low noise and low
consumption.
10 Power supply interface: for connecting AC power cable.
2
1
6
7
8
10
12
13
9
11
3
4
5