– 10 –
1 Switch Description
This chapter includes these sections:
◆ “Overview” on page 10
◆ “Key Technical Specifications” on page 14
Overview
The ECS2100-10T/10P/10PE are Gigabit Ethernet switches with 8 10/100/
1000BASE-T ports, and two Small Form Factor Pluggable (SFP) transceiver slots for
fiber connectivity.
The ECS2100-28T/28P/28PP/52T are Gigabit Ethernet switches with 24/48 10/100/
1000BASE-T ports, and four Small Form Factor Pluggable (SFP) transceiver slots for
fiber connectivity.
The ECS2110-26T is a 10G Ethernet switch with 24 10/100/1000BASE-T ports, and
two 10G SFP+ transceiver slots for fiber connectivity.
The switches include an SNMP-based management agent, which provides both in-
band and out-of-band access for managing the switch. Further, the switches
support both web and CLI-based configuration.
Power-over-Ethernet All of the 10/100/1000 Mbps ports on the ECS2100-10P, ECS2100-10PE, ECS2100-
28P, and ECS2100-28PP support both the IEEE 802.3af-2003 and IEEE 802.3at-2009
PoE standards. These switches are excellent choices for supplying power to
connected PoE devices such as web cameras, IP telephones, or access points.
Key Hardware
Components
The switches consist of several key hardware components. This manual describes
each specific component, or related components, together with their installation
requirements and procedures in each chapter. To understand each component in
detail, refer to the relevant section.
To Next Page
Loading...
Need help?
General