EdgeStar DWP62BL User Manual (English)

Other manuals for EdgeStar DWP62BL

Questions and Answers:

H
Hannah WilkinsonAug 23, 2025
How to troubleshoot an EdgeStar Dishwasher that does not start?
- S
  sbuckAug 23, 2025
  If your EdgeStar Dishwasher isn't starting, several factors could be at play. First, check your home's fuse box or circuit breaker; a blown fuse or tripped breaker can cut power to the unit. Replace the fuse or reset the breaker, and consider removing other appliances from the same circuit. Also, ensure the dishwasher is turned on, the door is securely closed and latched, and the power cord is correctly plugged into the wall socket.
C
Crystal CarlsonAug 31, 2025
Why is there a rattling noise inside my EdgeStar Dishwasher?
- P
  ploveAug 31, 2025
  A rattling noise inside your EdgeStar Dishwasher usually means an item isn't securely placed in the dish rack. Pause the wash cycle and secure the items.
I
ibrooksAug 30, 2025
What causes a knocking noise inside my EdgeStar DWP62BL Dishwasher?
- D
  Danny WilsonAug 30, 2025
  A knocking noise inside your EdgeStar Dishwasher indicates that the spray arm is hitting an item in the dish rack. Pause the wash cycle and rearrange the items obstructing the spray arm's movement.
D
David GuerraAug 29, 2025
How to remove black or gray marks on dishes from EdgeStar DWP62BL?
- H
  hhermanAug 29, 2025
  If you find black or gray marks on dishes from your EdgeStar Dishwasher, it may be due to utensils rubbing against the dishes. Use a mild abrasive cleaner to remove the marks and load the dishwasher carefully.
M
Mark RileyAug 28, 2025
Why are there suds in my EdgeStar Dishwasher?
- H
  Holly RobinsonAug 28, 2025
  Suds in your EdgeStar Dishwasher tub can be due to using the wrong detergent. Only use the specified detergent. If you've used the wrong detergent, open the dishwasher to let the suds evaporate. Add 1 gallon of cold water to the tub, then close and latch the door. Start the “RINSE” wash cycle to drain the water, repeating if necessary. Also, always clean up rinse aid spills immediately.
J
jennifercummingsAug 27, 2025
What to do if water is not pumped from EdgeStar Dishwasher?
- M
  Michael RodgersAug 27, 2025
  If your EdgeStar Dishwasher isn't pumping water out, begin by inspecting the drain hose for any kinks. Also, check the coarse filter for any clogs. Finally, ensure that your kitchen sink is draining correctly; if it isn't, you may need to consult a plumber.
M
marymeyerAug 26, 2025
Why is there cloudiness on glassware after using my EdgeStar DWP62BL?
- S
  Sarah WalshAug 27, 2025
  Cloudiness on glassware from your EdgeStar Dishwasher can result from using too much detergent with soft water; try using less detergent or selecting a shorter wash cycle. Also, the filter may be dusty or blocked, so clean the filter and replace it if needed.
M
mary57Aug 25, 2025
Why are the dishes still wet after using my EdgeStar DWP62BL?
- L
  Lauren AndersonAug 26, 2025
  Several factors can cause dishes to remain wet after a cycle in your EdgeStar Dishwasher. Check if the dishwasher has been loaded improperly, reload it according to instructions. Ensure that there is enough rinse aid. Avoid removing dishes too soon. Note that short cycles may have lower cleaning performance, select a more intensive cycle. Be aware that the dishwasher is not suitable for low-quality coating cutlery.
D
Debra DanielsAug 25, 2025
Why are dishes not cleaned in my EdgeStar DWP62BL Dishwasher?
- R
  Robin OwensAug 25, 2025
  If your EdgeStar Dishwasher leaves dishes unclean, consider these points: Ensure dishes are loaded properly, following the guidelines. Select a more powerful wash cycle. Use more detergent or switch to a different brand. Rearrange items blocking the spray arms. Lastly, verify that the filter combination at the dishwasher's base is clean and correctly installed.

EdgeStar DWP62BL Specifications

General

Model Number	DWP62BL
Capacity	6 Place Settings
Water Consumption	3.5 gallons per cycle
Wash Cycles	6
Noise Level	52 dB
Energy Star Rated	No
Color	Black
Type	Portable
Voltage	120V