195
When your device roams from one AP to another on the
same network, 802.11r uses a feature called Fast Basic
Service Set Transition (FT) to authenticate more quickly. FT
works with both preshared key (PSK) and 802.1X
authentication methods.
Select from WPA/WPA2 Mixed Mode-PSK, WPA2 or WPA
only. WPA2 is safer than WPA, but is not supported by all
wireless clients. Please make sure your wireless client
supports your selection.
Select “TKIP/AES Mixed Mode” or “AES” encryption type.
Specify a frequency for key renewal in minutes.
Choose from “Passphrase” (8 – 63 alphanumeric characters)
or “Hex” (up to 64 characters from 0-9, a-f and A-F).
Please enter a security key/password according to the
format you selected above.
802.11r Fast Transition Roaming Settings
Specify the mobility domain (2.4GHz or 5GHz)
Specify the encryption key
Enable or disable this function.
WPA-EAP:
Fast Roaming Settings will also be shown: