179
VI-8. Local Network
i. Network Settings
LAN-Side IP Address:
The “LAN-side IP address” page allows you to configure your AP Controller on
your Local Area Network (LAN). You can enable the AP to dynamically receive
an IP address from your router’s DHCP server or you can specify a static IP
address for your AP, as well as configure DNS servers. You can also set your AP
Controller as a DHCP server to assign IP addresses to other devices on your
LAN.
The AP’s default IP address is 192.168.2.2
Disable other DHCP servers on the LAN if using AP Controllers DHCP
Server.
To Next Page
Loading...
Need help?
General
