Edimax CAX1800 User Manual

17
IV-1. Changing IP Address
1. Go to “Network Settings” and tap “LAN-side IP Address”.
2. Enter the IP address settings you wish to use for your AP. You can use a
dynamic (DHCP) or static IP address, depending on your network
environment. Click “Apply” to save the changes and wait a few moments
for the AP to reload.
When you change your AP’s IP address, you need to use the new IP
address to access the browser based configuration interface instead
of the default IP 192.168.2.2.

Edimax CAX1800 Specifications

General

Brand	Edimax
Model	CAX1800
Category	Wireless Access Point
Language	English