92
VI-3. NMS Features
Descriptions of the functions of each main panel can be found below. When
using Edimax NMS, click “Apply” to save changes:
It is recommended that you login to the AP Controller to make
configurations to Managed APs.
Login:
1. Connect a computer to the designated AP Controller using an Ethernet
cable:
2. Open a web browser and enter the AP Controller’s IP address in the
address field. The default IP address is 192.168.2.2.
Your computer’s IP address must be in the same subnet as the AP
Controller.
To Next Page
Loading...
Need help?
General
