232
Date and Time:
Configure the date and time settings of the AP here. The date and time of the
device can be configured manually or can be synchronized with a time server.
Set the AP’s date and time manually using the drop down
menus.
Acquire
Current Time
from your PC
Click “Acquire Current Time from Your PC” to enter the
required values automatically according to your computer’s
current time and date.
The AP also supports NTP (Network Time Protocol) for
automatic time and date setup.
Enter the host name or IP address of the time server if you
wish.
Specify a frequency (in hours) for the AP to
update/synchronize with the NTP server.