69
wireless device you wish to connect.
Default Key: Select the default encryption key of WEP
encryption. Available options are Key 1 to Key 4; in most
cases you should use Key 1, unless otherwise instructed.
Key 1 to Key 4: Input the WEP encryption key here in
respective field. In most cases only Key 1 is required.
When you finish with setting, click ‘OK’ to save settings.
Edit You can edit the content of a selected profile.
Delete You can delete a selected profile. You WILL NOT be
prompted before deleting a profile, use with caution.
Activate Activate selected profile (connect to the wireless device
defined in the profile).
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort
and discard changes.
To Next Page
Loading...
