Manually: Set time manually.
NTP: Use NTP (Network Time Protocol) to
set up date and time automatically via the
network. If you have an Internet
connection or there’s a NTP server on your
local network, you can select this function
to help you keep the network camera’s
date and time correct.
There are 6 fields for you to fill, to enter
the current date and time. The format is:
YYYY/MM/DD HH:MM:SS
Click this button to fill the date / time
fields with your computer’s date and time.
Input NTP server’s hostname or IP address.
Select the time zone of the place you live
from the dropdown menu.
If the area you live in uses daylight saving,
select ‘Enable’, or select ‘Disable’ when
daylight saving is not used.
Click the ‘Apply’ button to save changes you made.
To Next Page
Loading...
