Input the user name required by the FTP
server.
Input the password of the FTP server.
Input the port number of the FTP server,
this should an integer between 1 and
65535.
Please don’t change this value unless so
instructed by the FTP server’s
administrator.
Input the path (folder) you wish to save
snapshot files to on the FTP server. If you
don’t want to specify a folder, you can
leave this field blank, and snapshot files
will be saved in the default root folder on
the FTP server.
Default setting is ‘Enable’ (use passive
mode). If the FTP server you’re going to
use does not support passive mode (using
active mode), select ‘Disable’ here.
Click the ‘Apply’ button to save changes you made. You can also click the ‘Send a
test file’ button to upload a test file to the FTP server, and a message box will
appear to indicate if the FTP upload was successful, so you can determine if the
parameters you set in this page are correct.
To Next Page
Loading...
