72
9.3.1.1 “Camera” Settings
In this tab you can configure all the cameras you wish to connect to. Up to 16
cameras can be connected simultaneously:
Here are the descriptions of all settings:
Select the channel number you wish to set.
All cameras found on your local network will
be displayed in the ‘Camera Search’ box.
Select a camera listed in the ‘Camera Search’
box, and click the ‘Select’ button to fill all
parameters of the selected camera in every
camera configuration field.
Rescan all cameras on your local network. Use
this if you didn’t see the camera you expected
in the ‘Camera Search’ box, or new cameras
have been added to your local network after
the last scan.
To Next Page
Loading...
