78
9.3.1.4 Motion-Triggered Recording
With this function activated, only motions captured by the camera will be
recorded, so you don’t have to waste hard disk storage space on images you
don’t need to pay attention to.
Here are the descriptions of all settings:
Select the channel number you wish to set.
Enable motion record function.
Disable motion record function.
Select the time duration from the dropdown
menu, in seconds, that the camera will record
when a motion has been detected.
Send an alarm when a motion has been
WARNING: For applications where security is of high priority, it’s not
recommended to use this function, since some tiny changes you may
need to know about may not be enough to trigger the camera and the
camera will not start recording.
To Next Page
Loading...
