Edirol PC-50 - Transmitting a GM2 System on Message

58
Use MIDI functionality
This lets you transmit a GM2 system on message .
fig.gm2-1_80
fig.util*
1
Simultaneously hold the [MIDI CH] button and [PGM CHANGE]
button down.
The display will indicate “UTL,” and the PC-50 enters UTILITY
mode.
fig.gm2
2
Press the [GM2 SYS ON] key.
The display will indicate “GM2” and blink.
fig.enter
3
Press the [ENTER] button.
* The setting will be cancelled if you press another button instead of the [ENTER]
button.
The GM2 system on message has now been transmitted.
Transmitting a GM2 system on message
2
1
3
PC-50_e.book 58 ページ ２００５年１１月１０日 木曜日 午前１０時３３分