To Next PageTo Next Page
Need help?Do you have a question about the Edirol PC-80 and is the answer not in the manual?
General| Type | MIDI Controller |
|---|---|
| Number of Keys | 49 |
| Velocity Sensitivity | Yes |
| Aftertouch | No |
| Battery | No |
| Control Elements | Pitch bend, modulation |
| Connectivity | USB |
| MIDI Ports | In, Out |
| Power | USB powered |
Explains important safety symbols, warnings, and cautions for unit operation.
Guidelines for safe electrical connections, cord handling, and environmental precautions.
Recommendations for power supply connection and unit placement.
Procedures for cleaning, data backup, and repair guidelines.
Instructions for CD-ROM care and legal copyright notices.
Details on using the unit as a MIDI controller.
Instructions for using the unit as a MIDI interface.
Guide to using the unit as an audio interface.
Overview of PC-80 settings, driver configuration, and troubleshooting.
Configuration options for the PC-80's audio functionality.
Settings related to the PC-80's software drivers.
Description of key operational buttons on the front panel.
Buttons to adjust the keyboard's octave range.
Controls for pitch/vibrato and details on built-in speakers.
Volume control, display information, and VALUE encoder functionality.
Buttons for controlling MIDI channels and program changes.
Grounding terminal and jacks for expression and hold pedals.
Ports for MIDI output and computer connection via USB.
The main switch for turning the unit's power on or off.
Jacks for power, subwoofer output, and master audio output.
Jacks for headphones and knob for adjusting input level.
Jacks for audio input and a slot for security devices.
Steps for installing and configuring the PC-80 on Windows systems.
Steps for installing and configuring the PC-80 on Macintosh systems.
Explains the roles of the driver and the PC-80 software synthesizer.
Procedure for installing the driver on Windows XP.
Settings for driver signing to allow installation.
Detailed steps for the driver installation process.
How to respond to Windows prompts during driver installation.
Steps for connecting the PC-80 and powering it on.
Guidance for the Windows Found New Hardware Wizard.
Completing the hardware installation wizard.
Restoring original driver signing settings after installation.
Optimizing system performance for audio/MIDI processing.
Procedure for installing the driver on Windows 2000.
Configuring file signature verification for driver installation.
Finalizing the driver installation process.
Instructions for restarting Windows post-installation.
Adjusting system performance options for better audio/MIDI handling.
Step-by-step guide to install the PC-80 software synthesizer.
Selecting the installation location for the software synthesizer.
Steps to launch and activate the PC-80 software synthesizer.
Procedure for installing PC-80 driver and software on Macintosh.
Handling authentication and restarting the Macintosh after installation.
Launching the PC-80 software synthesizer on Macintosh systems.
Basic operations for playing the PC-80 keyboard.
How to play back Standard MIDI Files using the PC-80.
Guide to recording performances using SONAR LE sequencer software.
Description of the PC-80's software synthesizer's capabilities.
Explanation of the synthesizer's structure (Synth and Player).
Steps to turn on and activate the software synthesizer.
How to adjust keyboard sensitivity using Velocity Curve settings.
Using the VALUE encoder to select sounds on the PC-80.
Using the computer's Synth panel to select sounds.
Explanation of keyboard modes for sound selection.
Steps to select the sound for the Lower keyboard zone.
Steps to select the sound for the Upper keyboard zone.
How to activate Split mode for playing two sounds simultaneously.
Defining the boundary keys for Lower and Upper keyboard zones.
Using the Synth panel to visually set the split points.
How to start and stop the metronome function.
Adjusting the tempo of the metronome.
Using the VALUE encoder to assign and control sound parameters.
Using the Synth panel's graphical interface to edit sound parameters.
How to save custom edited sounds as user sounds.
Using levers and pedals for pitch bending, vibrato, and note sustain.
Using expression pedals and octave shift buttons for performance control.
Description of the PC-80's Player function for SMF playback.
Steps to launch the Player function.
How to choose and load Standard MIDI Files for playback.
Controls for starting, stopping, and restarting song playback.
Options for repeating songs or folders during playback.
How to mute individual parts of a song for practice.
Instructions on how to access the unit's online help documentation.
Diagram illustrating MIDI and audio signal flow when using sequencer software.
Steps for launching SONAR LE and configuring initial settings.
Guidance on managing dialog boxes during SONAR LE startup.
Setting MIDI input and output devices within SONAR LE.
Importing and specifying instrument definitions for the PC-80.
Loading PC-80 specific instrument definition files into SONAR LE.
Associating the imported definition with output channels in SONAR LE.
Setting audio input and output devices within SONAR LE.
Solutions for common audio device errors in SONAR LE.
Disabling Local Control to prevent duplicate note sounding.
Setting up MIDI tracks for recording.
Controls for initiating and ending MIDI recording.
How to play back recorded MIDI data.
Setting the PC-80's input mode (Line, Guitar, Mic) for audio recording.
Setting up audio tracks for recording.
Adjusting the input gain using the PC-80's level knob.
Controls for initiating and ending audio recording.
How to play back recorded audio data.
Configuring Loopback function for recording synth audio.
Details on using the unit as a MIDI controller.
Instructions for using the unit as a MIDI interface.
Guide to using the unit as an audio interface.
Overview of PC-80 settings, driver configuration, and troubleshooting.
Technical details on MIDI message implementation and unit specifications.
Explains basic connections and MIDI signal flow for controller use.
Steps for connecting the PC-80 to a computer via USB.
Transmitting MIDI messages to an external sound module.
Description of the PC-80's primary operating mode for playing.
How to switch to and from Play mode.
Overview of actions possible in Play mode (MIDI transmit, etc.).
Description of Utility mode for transmitting control messages and settings.
How to access Utility mode from Play mode.
List of functions available in Utility mode (Bank Select, Reset, etc.).
How to set the MIDI channel for transmitting messages.
Transmitting MIDI messages to select sounds on a MIDI sound module.
Explanation of sound organization into banks for MIDI modules.
Steps to send a Program Change MIDI message.
Steps to send a Bank Select LSB MIDI message.
Steps to send a Bank Select MSB MIDI message.
Explanation of Controller mode and its functions.
Sending MIDI messages to control sequencer playback.
Steps to send a MIDI Start message for playback/recording.
Steps to send a MIDI Stop message for playback/recording.
Steps to send a MIDI Continue message to resume playback.
Sending Poly Mode On message to external sound modules.
Sending Mono Mode On message to external sound modules.
Sending Portamento On message to enable pitch smoothing.
Sending Portamento Off message to disable pitch smoothing.
Sending GM2 System On message for General MIDI compatibility.
Sending a Reset message to resolve MIDI module issues.
Defining the keyboard split points for Lower and Upper zones.
Assigning and transmitting parameter values using the VALUE encoder.
Explains basic connections and MIDI signal flow for controller use.
Steps for connecting the PC-80 to a computer via USB as an interface.
Connecting and recording audio from devices via the PC-80.
Details on how audio signals are routed and recorded.
Selecting appropriate input modes for connected devices.
Configuring the audio sample rate for recording.
Adjusting input levels and monitor functions.
Visual representation of the audio signal path within the PC-80.
Notes on using the PC-80's internal speakers and potential issues.
Detailed steps to select Line, Guitar, or Mic input modes.
Overview of configurable audio system settings.
How to set the sample rate for USB audio.
Settings for enabling or disabling the advanced audio driver.
How to turn the PC-80's built-in speakers on or off.
Enabling or disabling the bass enhancement function.
Enabling or disabling the loop back function for audio routing.
Table listing various system settings and their functions.
Enabling or disabling the F8 Clock transmission.
Setting the default tempo for the F8 Clock.
Adjusting keyboard sensitivity and velocity response curves.
Selecting between touch-sensitive or fixed velocity values.
Configuring the PC-80's MIDI interface mode.
Specifying which parameter the VALUE encoder controls.
List of parameters that can be assigned to the VALUE encoder.
Steps to restore the PC-80 to its factory default settings.
Settings for the advanced USB MIDI driver mode.
Configuring audio input/output devices for Windows.
Configuring audio input/output devices for Macintosh.
Configuring MIDI input/output devices for PC-80.
Steps to configure audio and MIDI devices in Windows XP.
Steps to configure audio and MIDI devices in Windows 2000.
Configuring sound input/output devices on Macintosh.
Setting up MIDI devices within Macintosh Audio MIDI Setup.
How to open the PC-80 driver settings panel on Windows.
Optimizing audio buffer size to reduce latency or pops.
Minimizing ASIO buffer size for ASIO-compatible software.
How to open the PC-80 driver settings panel on Macintosh.
Optimizing audio buffer size for input/output on Macintosh.
Increasing recording margin to reduce clicks or noise.
Adjusting recording timing to correct audio synchronization issues.
Steps to remove the PC-80 driver from Windows systems.
Steps to remove the PC-80 driver from Macintosh systems.
Solutions for issues preventing correct driver installation.
Troubleshooting steps for driver installation and uninstallation problems.
Steps to resolve system performance issues.
Verifying volume, speaker, connection, and power status.
Ensuring correct audio/MIDI output device and driver installation.
Managing software conflicts, sample rates, and device settings.
Verifying headphone connection, volume levels, and monitor settings.
Ensuring correct OS audio input and MIDI device settings.
Solutions for sound distortion or poor S/N ratio.
Steps to resolve clicks, pops, or noise in audio playback.
Addressing sound delays due to computer processing power.
Configuring Energy Saver and USB settings for optimal performance.
Handling multiple devices, software conflicts, and LAN activity.
Ensuring sample rate match and considering memory upgrades.
Troubleshooting noise entering via audio input jacks.
Preventing audio data loops by managing monitoring settings.
Addressing issues caused by high computer processing load.
Verifying mic/guitar connections and adjusting input levels.
Ensuring proper grounding, cable type, and minimizing noise sources.
Ensuring correct input mode and appropriate volume settings.
Troubleshooting steps when the software synthesizer fails to launch.
Solutions if the software synthesizer menu is not displayed properly.
Procedures for restarting the software synthesizer.
Ensuring synthesizer is running and volume levels are appropriate.
Verifying split settings and correct audio output device selection.
Resolving conflicts with other software and checking PC-80 connections.
Adjusting master volume, part volumes, and key velocity for sound quality.
Solutions for clicks, pops, or noise due to computer processing.
Addressing sound delays due to computer processing power.
Ensuring synthesizer is running and encoder is in correct mode.
Verifying parameter assignment and SMF song data compatibility.
Adjusting volume balance and checking for muted parts in playback.
Setting MIDI device settings in other software for PC-80 integration.
Resolving conflicts between PC-80 and other software using audio devices.
Steps to remove the PC-80 software synthesizer from Windows.
Steps to remove the PC-80 software synthesizer from Macintosh.
Details on transmitted MIDI channel voice messages.
Details on transmitted Program Change, Channel Pressure, and Pitch Bend messages.
Information on MIDI channel mode and realtime system messages.
Details on System Realtime and Exclusive messages.
Reference table for converting MIDI hexadecimal values to decimal.
Chart summarizing transmitted and recognized MIDI functions.
Key physical and electrical specifications of the PC-80.
Specifications related to the PC-80's software synthesizer.
Radio Frequency Interference Statement from the FCC.
Compliance statement for Canadian Interference-Causing Equipment Regulations.
Formal statement of compliance with regulations.
