Edirol PC-80 - Using PC-80 as MIDI Controller - VALUE Encoder Usage; Transmitting Parameter Values via Encoder

78
Using the PC-80 as a MIDI controller keyboard
When you operate the VALUE encoder in Controller mode (p. 67), values for the specified
parameter will be transmitted.
fig.memory-1_80
fig.util
1
Simultaneously press the MIDI CH button and PGM CHANGE button.
The MIDI CH button and PGM CHANGE button will light, and you will be in
Controller mode.
2
Operate the VALUE encoder .
Values for the specified parameter will be transmitted.
Using the VALUE encoder to transmit values for a
specified parameter
PLAY
CONTROLLER
A specified parameter
The instrument can be set so values for a certain parameter you specify are transmitted when you
operate the PC-80’s VALUE encoder.
To specify the parameter
In Utility mode, use System Settings to specify the parameter to be assigned to the VALUE
encoder.
“System settings” (p. 89)
21
PC-80_e.book 78 ページ ２００５年１１月１０日 木曜日 午前１１時３４分