Edirol PC-80 - SONAR LE Setup and Initial Configuration; Starting SONAR LE and Wave Profiler; Handling SONAR LE Dialog Boxes

47
Recording your performance in sequencer software (SONAR LE)
In order to use SONAR LE, you must first install it in your computer. For the
installation procedure, refer to the CD-ROM package.
1
Start up SONAR LE.
2
The first time you start up, the
Wave Profiler dialog box will
appear automatically.
Be sure you click [Yes] .
3
When the display indicates “Audio hardware has been successfully
profiled.” click [Close] to close the dialog box.
If an Audio Device Error appears, click [Cancel] at this point.
4
The Tip Of The Day may appear. Click [Close] to close the dialog box.
5
A dialog box indicating “No MIDI Outputs
Selected” may appear.
If so, choose “Continue With No MIDI
Output.”
If a dialog box indicating “No MIDI Inputs
Selected” appears, choose “Continue With No MIDI Input.”
6
The Quick Start dialog box will appear. Click [Close] to close this window.
Starting up SONAR LE and making settings
For details on operating
SONAR LE, refer to the
online help for SONAR LE.
Online Activation Dialog
b
ox
This dialog box allows you
to activate SONAR LE.
Please activate the
software using one of the
methods provided.
When you have read the
contents of the dialog box,
click [OK] or [Cancel] to
close the dialog box.
PC-80_e.book 47 ページ ２００５年１１月１０日 木曜日 午前１１時３４分