Edirol PC-80 - System Settings - F8 Clock Control; F8 Clock On;Off Setting

90
System settings for the PC-80
fig.sys-1
fig.util*
1
Simultaneously press the MIDI CH button and PGM CHANGE button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the [SYSTEM] key on the keyboard.
“SY0” appears (blinking) in the display.
3
Use the VALUE encoder or the [0] key of the keyboard to choose “ SY0 .”
fig.enter
4
Press the ENTER button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the VALUE encoder or press the [0] or [1] key of the keyboard to switch
F8 Clock on or off.
The display will indicate either “ON” or “OFF.”
6
Press the ENTER button.
F8 CLOCK ON/OFF
241
3
Key Setting
0 OFF
1 ON
PC-80_e.book 90 ページ ２００５年１１月１０日 木曜日 午前１１時３４分